Normale / Legere & Big / Light15 - Parts and Prices
prices effective January 2007 - product list updated May 2007
| DRIVESHAFTS | |
| Driveshaft with new outer CV Joint and new inner cardan with standard taper fit to brake drum |
£325.00
|
| Driveshaft with new outer CV joint and new inner cardan with splined fit to brake drum (exchange brake drum required). Complete with all nuts/spacers/etc. |
£450.00
|
| CLUTCH | |
| Diaphragm pressure plate and sealed release & spigot bearings (exchange flywheel required) |
£235.00
|
| Lighten flywheel from 16kg to 9 kg |
£40.00
|
| Reline clutch plate (exchange clutch plate required) |
£50.00
|
| GEARBOX | |
| Crown wheel and pinion (10 x 31) with matching speedometer pinion |
£425.00
|
| Reconditioning of gearbox including all-new bearings, bushes/oil seals/etc., reconditioned synchromesh hub and gear cones |
£850.00
|
| Gearbox strengthening flanges for output flanges with new bearings and oil seals (exchange output flanges required) |
£200.00
|
| Reconditioned output flange (exchange output flange required). Includes oil seal and nyloc nuts |
£50.00
|
| Output flange stud (standard or oversize) |
£3.50
|
| Nyloc nut for output flange stud (14mm A/F) |
£0.50
|
| Top shaft lock washer |
£4.00
|
| Pinion shaft locknut |
£5.00
|
| Gearbox gasket set |
£4.50
|
ID / DS19 4-speed conversions available for all Traction types
- please enquire for price and options -
| ENGINE | |
| Stainless steel exhaust pipe/manifold nut |
£3.50
|
| Cylinder head gasket |
£45.00
|
| Wet liner base seal |
£0.75
|
| "Figure of 8" wet liner seals available in various thicknesses: 0.25 / 0.40 / 0.50 / 0.75 / 1.00 mm | £2.50 |
| ID/DS Crankshaft plugs (stainless steel) each | £6.50 |
| Reconditioned oil pump using new oversize gears to allow for wear in the pump body | £125.00 |
| New oil pressure relief valve for fitting to Perfo oil pumps. Complete with Dowty washers and 1/8"BSPT plug |
£40.00
|
| SUSPENSION | |
| Reconditioned wishbone spindle with new phosphor bronze bushes (exchange spindle required) | £75.00 |
| Floating brake shoe kit - Front. Includes relined shoes that are skimmed to the exact diameter of your brake drum. Exchange shoes required. | £200.00 |
| Floating brake shoe kit - Rear. Includes relined shoes that are skimmed to the exact diameter of your brake drum. Exchange shoes required. |
£175.00
|
PLEASE NOTE : ALL PRICES ARE EXCLUSIVE OF VAT
Contact Mr. Williams at Steam-Car-Developments for assistance with updating the mechanical features of your Traction series vehicle.